Engineering & Permitting in the Lehigh Valley

Yes for most Lehigh Valley jurisdictions. Allentown, Bethlehem, Easton and the townships and boroughs across Lehigh and Northampton counties all require a licensed Pennsylvania PE stamp on rack drawings above threshold height or specified PSF. Self-submission is sometimes accepted for very small under-threshold installs in smaller municipalities, but rejection risk is high without a stamp and the resubmittal delay usually erases any savings.

Lehigh County and City of Easton typically run 2–4 weeks on initial review. City of Allentown typically runs 3–5 weeks, with high-piled storage projects sometimes longer due to fire suppression coordination. the Slate Belt and smaller Lehigh Valley municipalities are typically the fastest at 2–4 weeks. We build these timelines into the project schedule and manage plan review comments actively to avoid resubmittal loops.

A full package: rack elevation and plan drawings, anchor details with concrete strength assumptions, seismic and wind-load calcs per IBC as adopted by the Pennsylvania Uniform Construction Code, in-rack sprinkler clearances per NFPA 13, column protection specifications, and rated load placards. For high-piled storage we add IFC Chapter 32 analysis with commodity classification — standard for high-piled storage and defense-supply warehouses throughout the Lehigh Valley.

Active experience submitting to the City of Allentown Bureau of Building Standards and Safety, the municipal building code office, City of Easton Bureau of Codes and Inspections, City of Bethlehem Bureau of Code Enforcement, the Northampton County township code offices, the Slate Belt borough code offices, and other Lehigh Valley county and municipal agencies. Every jurisdiction has specific submittal quirks — we pre-format packages to match.

Budget roughly $1,500–$3,500 for stamped engineering calculations and drawings on a typical Lehigh Valley rack project, plus municipal permit fees that vary by jurisdiction. Lehigh Valley Pallet Racking bundles the engineering, high-piled storage review, and permit submittal into one package and submits them concurrently, keeping most plan reviews to three to six weeks.

Not legally for most systems — every Lehigh Valley jurisdiction requires a building permit for rack over 8 feet tall, and storage above 12 feet triggers fire-code high-piled storage review. Unpermitted rack risks stop-work orders, insurance denial after an incident, and forced tear-outs. Lehigh Valley Pallet Racking handles the entire permitting process so installations are inspection-ready from day one.